Electro Industries Shark 200 Installation & Operation Manual page 160

8. To view meter information, or to upgrade the Network card's firmware, click
Information on the left side of the webpage. You will see the webpage shown
below.
NOTES:
• The firmware runtime version, displayed in the Run Ver field of this webpage,
determines the default password for Network card upgrading and resetting.
• Any special characters (i.e., any of the following characters * :" | \ < > ? /) used
in the meter name or any other designator string in the meter, are
displayed as '_' (underscore) in the webpage.
• In addition to information about the meter and its firmware, this webpage gives
you access to the following functions:
• Upgrading the Ethernet card's firmware (see 8.4.2.1: Upgrading the
Ethernet Card's Firmware on page 8 - 11).
• Resetting the Ethernet card (see 8.4.2.2: Resetting the Ethernet Card on
page 8 - 13).
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
8: Using the INP100S Network Card
#
Doc E149701
Firmware
Runtime
Version
8-10