Electro Industries Shark 200 Installation & Operation Manual page 167

5. The next screen you will see is Alarm Email Data.
This screen lets you designate to whom the alarm email will be sent, any data you
want sent with the email, and the format the data should be in. If you are not set-
ting up an alarm email, just click the Next button and go to step 6.
a. Enter the email address of the person sending the email in the From field.
b. Enter the email subject line in the Subject field- the default is Alarm Email.
c. Enter the email address of the person receiving the email in the To field (only one
email address can be entered).
d. Enter the email address of anyone you want to receive a copy of the email in the
CC field (only one email address can be entered).
e. Select any data you want included in the email from the list, by clicking on the
button next to it. Note that these values are taken about one second after the
alarm condition occurred. You can click Set All to select all of the values at one
time, or Clear All to clear all of your selections.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
8: Using the INP100S Network Card
#
Doc E149701 8-17