8.4.2.3: Email Notification
The INP100S card can be configured to send either alarm or periodic notification
emails and to send meter data along with either type of email. The Firmware version
of the Ethernet card must be 337 or higher for this feature to be available. See page
8-9 for information on finding the firmware version.
From one of the Shark® 200 meter's webpages:
1. Click Information on the left side of the webpage.
2. Click Email Notification on the bottom right of the webpage. The first screen you
will see is Email Server, shown below.
3. This screen lets you set up the SMTP email server that the Network card will use to
send the emails.
a. Enter the url or IP address of the email server you will be using.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
8: Using the INP100S Network Card
#
Doc
E149701
8-14