Iec61850 Protocol Ethernet Network Card; Default Configuration - Electro Industries Shark 200 Installation & Operation Manual

7.10.2: Default Configuration

The Shark® 200 meter automatically recognizes the installed Option card during
power up. If you have not programmed a configuration for the card, the unit defaults
to the following:
IP Address: 10.0.0.2
Subnet Mask: 255.255.255.0
Default Gateway: 0.0.0.0
7.10.3: Wiring Diagram
Pin 1
IMPORTANT! The INP300S uses an auto-detecting circuit that automatically
switches the transmit and receive in order to properly align communication. Because
of this, when you are communicating directly to a meter with a PC or a switch, a
straight cable can be used.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
10/100
BaseT
Ethernet
ACTIVE
8
7
6
5
4
LINK
3
2
1
IEC61850
Total
Port
WEB
Solutions
Figure 7.9: IEC61850 Protocol Ethernet Network Card
7: Using the I/O Option Cards
RJ45 Plug
RD-
RD+
TD-
TD+
#
Doc E149701
Cable
7-21