Recommended Tools for Shark® 200 Meter Installation:
• #2 Phillips screwdriver
• Small adjustable wrench
• Wire cutters
The Shark® 200 meter is designed to withstand harsh environmental conditions;
however it is recommended you install it in a dry location, free from dirt and corrosive
substances (see Environmental specifications in 2.2: Specifications on page 2-12).
3.2: ANSI Installation Steps
1. Slide meter with Mounting Gasket into panel.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
Figure 3.4: ANSI and DIN Cutout Dimensions
3: Mechanical Installation
#
Doc
E149701
3-3