Optional, Through I/O Card Slots; Compliance - Electro Industries Shark 200 Installation & Operation Manual

Optional, through I/O card slots:

1. INP100S - 10/100BaseT Ethernet card: supports 12 simultaneous sockets of
Modbus® TCP/IP and 5 simultaneous sockets of DNP 3.0 over Ethernet.
2. FOSTS - Fiber Optic output ST terminated card
3. FOVPS - Fiber Optic output Versatile Link terminated card
Protocols:
Com Port Baud Rate:
Com Port Address:
Data Format:
Shark® 200T transducer
Mechanical Parameters
Dimensions: see Chapter 3.
Weight (without Option card):
*With Runtime Firmware Version 26 or higher

2.3: Compliance

• Certified to UL 61010-1 and CSA C22.2 No. 61010-1, UL File: E250818
• CE (EN61326-1, FCC Part 15, Subpart B, Class A)
• IEC 62053-22 (0.2% Class)
• ANSI C12.20 (0.2% Accuracy)
• ANSI (IEEE) C37.90.1 Surge Withstand
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
2: Meter Overview and Specifications
Modbus RTU, Modbus ASCII, DNP
3.0
RS485 Only: 1200, 2400, 4800*;
All Com Ports: 9600 to 57600 bps
001-247; DNP ONLY - 001 - 65520
8 Bit, No Parity (RS485: also Even
or Odd Parity*)
Default Initial communication baud
rate 9600 (see Chapter 5)
2 pounds/ 0.9 kg (ships in a 6"
/15.24 cm cube container)
#
Doc E149701 2-17