Commercial Tools For Iec 61850 Implementation; E.2: Using The Shark® 200 Meter's Iec 61850 Protocol Ethernet Network Card - Electro Industries Shark 200 Installation & Operation Manual

• http://opensclconfig.git.sourceforge.net/
Apparent open-source project, not tested
• http://www.sisconet.com/downloads/SCDtoCIDConverter0-9.exe
filters SCD file to a CID file
• http://www.sisconet.com/downloads/skunkworks2-8.exe Ethernet analyzer
E.1.7: Commercial Tools for IEC 61850 Implementation
Following is a list of tools for IEC 61850 configuration which you can purchase:
• http://www.sisconet.com/ax-s4_61850.htm
Client for IEC 61850
• http://products.trianglemicroworks.com/documents/
TMW%2061850%20Test%20Suite%20Combined.pdf
Clients and servers for IEC 61850
• http://www.omicron.at/en/products/pro/communication-protocols/iedscout/
test client
• http://kalkitech.com/products/sync-6000-series-scl-manager--iec61850-substa-
tion-design-tool
SCL editing tool
E.2: Using the Shark® 200 Meter's IEC 61850 Protocol Ethernet
Network Card
This section contains instructions for understanding and configuring the Shark® 200
meter's IEC 61850 Protocol Ethernet Network Option card.
E.2.1: Overview
The IEC 61850 Protocol Ethernet Network card is a Shark® 200 standard I/O board.
The IEC 61850 Protocol Ethernet Network card has the following features:
• Standard Ethernet 10/100 Mbps connector is used to link the unit into an Ethernet
network.
• Standard operation port 102, which can be reconfigured to any valid TCP/IP port.
• Up to 5 simultaneous connections can be established with the unit.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
E: Using the IEC61850 Network Card
#
Doc E149701 E-13