Electro Industries Shark 200 Installation & Operation Manual page 340

4. From the Tree menu, click Services and Security.
5. Check the Enable Web server box, and set the Web server port to 80 (this is the
default).
6. Click Update Device to send the settings to the Shark® 200 meter. The meter will
reboot. The IEC 61850 Protocol Ethernet Network card is now configured properly
to work on an IEC 61850 network.
NOTE: The INP300S Network card with Network Firmware version 3.43 and higher
offers enhanced security with the Exclusive Client feature, which lets you Whitelist
an IP address or MAC address. When that address is used to connect to the meter,
all other network communication with the meter, through the same Network card,
is suspended. This ensures that anything being done, e.g., updating programmable
settings, while the Whitelist address is being used to communicate with the meter,
is secure. Refer to Chapter 8 of the Communicator EXT
EXT Software User Manual for instructions on setting the Exclusive Client feature.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
E: Using the IEC61850 Network Card
TM
4.0 and MeterManager
#
Doc E149701 E-20