Electro Industries Shark 200 Installation & Operation Manual page 6

Use Of Product for Protection
Our products are not to be used for primary over-current protection. Any protection
feature in our products is to be used for alarm or secondary protection only.
Statement of Calibration
Our instruments are inspected and tested in accordance with specifications published
by Electro Industries/GaugeTech. The accuracy and a calibration of our instruments
are traceable to the National Institute of Standards and Technology through
equipment that is calibrated at planned intervals by comparison to certified standards.
For optimal performance, EIG recommends that any meter, including those manufac-
tured by EIG, be verified for accuracy on a yearly interval using NIST traceable accu-
racy standards.
Disclaimer
The information presented in this publication has been carefully checked for
reliability; however, no responsibility is assumed for inaccuracies. The information
contained in this document is subject to change without notice.
Dans ce manuel, ce symbole indique que l'opérateur doit se référer à un important
AVERTISSEMENT ou une MISE EN GARDE dans les instructions opérationnelles. Veuil-
lez consulter 4.1: Considerations When Installing Meters on page 4- 1, pour des infor-
mations importantes relatives à l'installation et branchement du compteur.
The following safety symbols may be used on the meter itself:
Les symboles de sécurité suivante peuvent être utilisés sur le compteur même:
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
This symbol indicates that the operator must refer must to an
important WARNING or CAUTION in the operating instructions.
Please see 4.1: Considerations When Installing Meters on page 4-
1, for important safety information regarding installation and
hookup of the Shark® 200/200T meter.
This symbol alerts you to the presence of high voltage, which can
cause dangerous electrical shock.
Ce symbole vous indique la présence d'une haute tension qui peut
provoquer une décharge électrique dangereuse.
#
Doc E149701 iv