Keep-Alive Feature; Testing - Electro Industries Shark 200 Installation & Operation Manual

E.6: Keep-Alive Feature
The INP300S card supports user configurable Keep-Alive timing settings. The Keep-
Alive feature is used by the TCP/IP layer for detecting broken connections. Once
detected, the connection is closed in the Network card, and the server port is freed.
This prevents the card from running out of server connections due to invalid links. See
8.4.5: Keep-Alive Feature on page 8-24, for instructions on configuring this feature.
E.7: Testing
You can use any IEC 61850 certified tool to connect to the Shark® 200 meter and
test out the IEC 61850 protocol (see example screen below). There are numerous
commercial tools available for purchase.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
E: Using the IEC61850 Network Card
#
Doc E149701 E-29