Electro Industries Shark 200 Installation & Operation Manual page 162

3. Click the Browse button to locate the Upgrade file. Make sure that you select the
INP100S option card upgrade file. If you upgrade with an INP300S upgrade file, the
card will not work.
4. Enter the safety code (supplied with the Upgrade file) and the password: the
default is n3tUp!0Ad for firmware runtime version 3.35 or higher; and eignet2009
for earlier firmware runtime versions. See the note on page 8-9.
5. Click Submit. The upgrade starts immediately (it may take several minutes to
complete). Once the upgrade is complete, you will see a confirmation message.
CAUTION! Note the Warning message on the screen. If there is a power interrup-
tion during upgrade, please call EIG's Technical Support department at 516-334-
0870 for assistance.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
8: Using the INP100S Network Card
#
Doc E149701 8-12