Using The Shark 200 Meter; Understanding Meter Face Elements; Face Plate With Elements - Electro Industries Shark 200 Installation & Operation Manual

6: Using the Shark® 200 Meter
6.1: Introduction
You can use the Elements and Buttons on the Shark® 200 meter's face to view meter
readings, reset and/or configure the meter, and perform related functions. The follow-
ing sections explain the Elements and Buttons and detail their use.

6.1.1: Understanding Meter Face Elements

Reading
Type
Indicator
IrDA Com
Port
% of Load
Bar
The meter face features the following elements:
• Reading type indicator: e.g., Max
• Parameter designator: e.g., Volts L-N
• Watt-hour test pulse: Energy pulse output to test accuracy
• Scaling factor: Kilo or Mega multiplier of displayed readings
• % of Load bar: Graphic Display of Amps as % of the load (see 6.3: Understanding
the % of Load Bar on page 6-16, for additional information)
• IrDA Communication port: Com 1 port for wireless communication
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
MENU ENTER
MAX
MIN
-
LM1
LM2
%THD
0000
PRG
-
120%-
-
90%-
60%-
30%-
%LOAD
Figure 6.1: Face Plate with Elements
Doc
6: Using the Shark® 200 Meter
VOLTS L-N
Parameter
VOLTS L-L
Designator
AMPS
A
W/VAR/PF
VA/Hz
Wh
VARh
B
VAh
Watt-hour
C
Test Pulse
Wh Pulse
Scaling
KILO
Factor
MEGA
#
E149701 6-1