Using The Ethernet Card (Inp100S); Hardware Connection; Meter With Inp100S Card; Overview - Electro Industries Shark 200 Installation & Operation Manual

8: Using the Ethernet Card (INP100S)

8.1: Overview

The Shark® 200 meter can have up to two optional Ethernet cards (INP100S). When
you install the INP100S in your Shark® 200 meter, you gain the capability of commu-
nicating over the Ethernet using EIG's Rapid Response™ technology.

8.2: Hardware Connection

The INP100S card fits into either of the two Option Card slots in the back of the
Shark® 200 meter. Refer to Chapter 7 for card installation instructions.
Use a standard RJ45 10/100BaseT cable to connect to the Ethernet card. The INP100S
card auto-detects cable type and will work with either straight or crossover cable.
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
GND
L (+)
N (+)
Vref
Va
Vb
Vc
Figure 8.1: Meter with INP100S Card
Doc
8: Using the INP100S Network Card
10/100
BaseT
Ethernet
Active
Link
Total
WEB
Solutions
#
E149701
RJ45
cable
connects
here
8-1