Table of Contents
Advertisement
7.3: Configuration
7.3.1: Main Menu
Push MENU from any of the Auto-Scrolling Readings. The MAIN MENU Screens appear.
The String for Reset Mode (rSt) appears (blinking) in the A Screen.
If you push DOWN, the MENU scrolls and the String for Configuration Mode (CFG) appears
(blinking) in the A Screen.
If you push DOWN again, the String for Operating Mode (OPr) appears (blinking) in the A
Screen.
If you push DOWN again, the MENU scrolls back to Reset Mode (rSt).
If you push ENTER from the Main Menu, the meter enters the Mode that is in the A Screen and
is blinking. See Appendix A for Navigation Map.
7.3.2: Reset Mode
If you push ENTER from the Main Menu, the meter enters the Mode that is in the A Screen and is
blinking. Reset Mode is the first mode to appear on the Main Menu. Push ENTER while (rSt) is in
the A Screen and the "RESET ALL? no" screen appears. Reset ALL resets all Max and Min
values. See Appendix A for Navigation Map.
e
Electro Industries/GaugeTech
If you push ENTER again, the
Main Menu continues to scroll.
The DOWN button does not
change the screen.
If you push the RIGHT button, the
RESET All? YES screen appears.
To Reset All, you must enter a
4-digit Password, if Enabled in the
software (see section 5.22).
Push ENTER; the following
Password screen appears.
Doc #: E145701
7-2
Hide quick links:
Advertisement
Table of Contents
