Dnp Object Point Map; Binary Input Status With Flags; Supported Flags - Electro Industries Shark 200 Installation & Operation Manual

C.7: DNP Object Point Map
Object 1 - Binary Input Status with Flags
Read with Object 1, Var 2, and Qualifiers 0, 1, 2 or 6. (Included in Class 0 responses.)
Object Point Var
1 0 2
1 1 2
1 2 2
1 3 2

Supported Flags:

Bit 0: ONLINE (0=Offline, 1=Online) (If the Input is not present it will be shown as
Offline.)
Bit 1: RESTART (1=The Object is in the Initial State and has not been updated since
Restart.)
Bit 7: STATE (0=Off, 1=On)
Electro Industries/GaugeTech
Electro Industries/GaugeTech
The Leader In Power Monitoring and Smart Grid Solutions
The Leader In Power Monitoring and Smart Grid Solutions
Description Format
BYTE
Read Digital Input
1 RO1S Status 1
(expansion port 1)
BYTE
Read Digital Input
2 RO1S Status 2
(expansion port 1)
BYTE
Read Digital Input
3 RO1S Status 1
(expansion port 2)
BYTE
Read Digital Input
4 RO1S Status 2
(expansion port 2)
C: DNP Mapping
Range Multiplier Units
Bit Flags None
N/A
Bit Flags None
N/A
Bit Flags None
N/A
Bit Flags None
N/A
#
Doc E149701
Comments
Returns the Status
and State of the
Input in the Flags.
Returns the Status
and State of the
Input in the Flags.
Returns the Status
and State of the
Input in the Flags.
Returns the Status
and State of the
Input in the Flags.
C-6