A.1: Introduction
The Shark 100 meter can be configured and a variety of functions performed using the BUTTONS
on the meter face.
An Overview of the Elements and Buttons on the meter face can be found in Chapter 6.
An Overview of Programming using the BUTTONS can be found in Chapter 7.
The meter can also be programmed using software (see Communicator EXT 3.0 Manual).
A.2: Navigation Maps (Sheets 1 to 4)
The Shark Navigation Maps begin on the next page.
They show in detail how to move from one screen to another and from one Display Mode to another
using the buttons on the face of the meter. All Display Modes will automatically return to Operating
Mode after 10 minutes with no user activity.
Shark Navigation Map Titles:
Main Menu Screens (Sheet 1)
Operating Mode Screens (Sheet 2)
Reset Mode Screens (Sheet 3)
Configuration Mode Screens (Sheet 4)
e
Electro Industries/GaugeTech
Appendix A
Shark Navigation Maps
Doc # E145701
A-1