Table of Contents
Advertisement
6.2.2: Using the Main Menu
1. Press the Menu button. The Main Menu screen appears.
• The Reset: Demand mode (rStd) appears in the A window. Use the Down button to scroll, causing the
Reset: Energy (rStE), Configuration (CFG), Operating (OPr), and Information (InFo) modes to move to
the A window.
• The mode that is currently flashing in the A window is the "Active" mode, which means it is the mode that can
be configured.
For example:
Press Down Twice -
2. Press the Enter button from the Main Menu to view the Parameters screen for the mode that is currently
active.
6.2.3: Using Reset Mode
Reset Mode has two options:
• Reset: Demand (rStd): resets the Max and Min values.
• Reset: Energy (rStE): resets the energy accumulator fields.
Press the Enter button while either rStd or rStE is in the A window.
The Reset Demand No or Reset Energy No screen appears.
• If you press the Enter button again, the Main Menu appears,
with the next mode in the A window. (The Down button
does not affect this screen.)
• If you press the Right button, the Reset Demand YES or
Reset Energy YES screen appears.
Press Enter to perform a reset.
NOTE: If Password Protection is enabled for Reset, you must
enter the four digit Password before you can reset the meter.
(See Chapter 5 in the
information on Password Protection.)
To enter a password, follow the instructions in Section 6.2.4.
CAUTION! Reset Demand YES resets all Max and Min values.
Once you have performed a reset, the screen displays either "rSt dMd donE"
or "rSt EnEr donE"and then resumes auto-scrolling parameters.
e
Electro Industries/Gauge Tech
CFG moves to A window. Press Down
Communicator EXT User's Manual
for
Doc# E149701
Twice - OPr moves to A window.
6-3
Advertisement
Table of Contents
