Setting The 4K Up-Converter Conversion Method - Sony MVS-8000X User Manual

Setting the 4K Up-Converter
Conversion Method
This sets the conversion method mode and enables/
disables the super resolution function used when up-
converting.
Note
The conversion mode is enabled only when the input
signal format is set to 1080i.
1
In the Engineering Setup >Switcher >Input menu
(7332), press [FC Adjust].
The FC Adjust menu (7332.2) appears.
2
Select the target input to set.
3
In the <Conversion> group, select the conversion
mode.
Frame: Conversion in frame units
Field: Conversion in field units
Adaptive Y: Detects motion in the luminance signal,
and automatically switches between conversion
using frame units and field units.
Adaptive Y/C: Detects motion in the luminance and
hue signals, and automatically switches between
conversion using frame units and field units.
When [Adaptive Y] or [Adaptive Y/C] is selected, set
the following parameter.
No. Parameter Adjustment
Motion detection sensitivity
2 Motion
Select
a) 1: Mode with highest proportion converted from frames (still picture
priority mode)
2: Mode with higher proportion converted from frames.
3: Mode with higher proportion converted from fields.
4: Mode with highest proportion converted from fields (motion
priority mode)
4
Press [Super Resolution] to enable/disable the super
resolution function.
When super resolution is enabled, a sharper image is
produced according to the resolution and noise
processing adjustments.
[Super Resolution] is enabled by factory default.
There is no need to change this under normal
circumstances, however, if you want to disable it,
press [Super Resolution] to turn it off.
a)
442