Saving A Frame Memory File List; Batch File Operations; Saving Files In Batch - Sony MVS-8000X User Manual

3
Enter a name of up to 8 characters in the keyboard
window, and press [Enter].
To delete a frame memory folder
1
Select a frame memory folder.
2
Press [Delete].
3
Check the message, then press [Yes].

Saving a Frame Memory File List

If you save all files currently held in frame memory as a
single backup data set using high-speed recording on video
tape or other medium, a file of file list data is created that
is needed for successful frame memory file restore
operation. This file must be saved on the local drive or a
removable drive.
1
Open the File >Frame Memory >File Name Data
menu (7153).
2
In the operating device selection section on the left or
right, select [Register].
The register name "FM_Bkup" appears.
In the device selection area on the opposite side,
specify the save destination device.
3
In the device selection area for the save destination
device, select [Local Drive] or [Removable Drive],
then specify a directory.
4
Select the destination file for saving.
5
Press [Save].
The file is saved.
To load a saved file, press [Load].
To view detailed file information
Press [File Edit].
A detailed file list appears. You can edit the files in the
same way as for other files.

Batch File Operations

You can process all files or registers in batch.

Saving Files in Batch

You can save the data in registers to the local drive or
removable drive in batch.
Notes
• There is a risk that files saved on the local drive may
become unusable if the local drive experiences trouble.
Always keep separate backup copies of important files
on a removable drive.
• Format a commercially available removable drive before
using it for the first time (see page 405).
• You cannot perform the following operation when [Src
Patch Link] is enabled (see page 478).
1
Open the File >All, External File >All menu (7161).
2
Select the target device for operation (see page 379).
In the device selection area on the left, select
[Register].
In the device selection area on the right, select [Local
Drive] or [Removable Drive], then specify a directory.
3
In the <Category> group, select the category of the
target registers to save.
For categories you do not want to save, press the
corresponding button, turning it off.
To select all categories, press [All Select], turning it
on.
For details about target data for operations, see
"Types of files" (page 375).
Note
Frame memory is not selected when you press [All
Select]. To apply the setting to frame memory, press
[Frame Memory], turning it on. When frame memory
is selected, it is not possible to apply settings to
<Category> group data.
4
Press [t Save].
5
Check the message, then press [Yes].
384