Sony MVS-8000X User Manual page 372

Recalling a menu macro register
1
Open the Macro >Menu Macro Register >Recall &
Run menu (5431).
Interval between events currently set
Selected event number / total number of events
Currently recalled register
Register number and name
L/E indicator: "L" indicates a locked register,
and "E" indicates an empty register.
Event interval
Number of register selected in the
menu macro register list
Menu macro creation list
2
Select a register.
3
Press [Recall & Run X] or [Recall X] (X is the number
of the register selected in the menu macro register list).
To execute the menu macro at the same time as
recalling the register, press [Recall & Run X].
To recall the register only, press [Recall X].
Executing a menu macro
In the Macro >Menu Macro Register >Recall & Run menu
(5431), check that you are not in macro editing mode, then
use the following procedure.
1
Select the start event to execute.
2
Press [Run].
To stop execution of a macro
Press [Stop].
To move to the start of a menu macro event
Press [Rewind].
Recalling a menu macro register from a
macro register
Menu macro recall and execution operations can be saved
as events in a control panel macro, and then recalled.
If you execute a menu macro with the control panel in
macro editing mode, then this operation is recorded as an
event.
For details about operations for registering events, see the
following.
• "Macro Operations (Numeric Keypad Control Block
and Utility/Shotbox Control Block)" (page 351)
• "Macro Operations (Flexi Pad Control Block)"
(page 356)
• "Macro Operations (Menu)" (page 360)
Registering a menu macro in the shortcut
menu
1
In the Home >Favorites >Button Edit menu (0023),
select a button to register.
2
Press [MenuMacro Set].
The Menu Macro Set menu (0023.1) appears.
The L/E indicator indicates the following status.
L: Locked register
E: Empty register
L/E indicator
3
In the list on the left, select the button number to
assign.
4
Press [Set].
371