Sony MVS-8000X User Manual page 30

1st row
2nd row
b Display
c Cross-point
indicators
3rd row
4th row
a Button rows
Used as cross-point buttons for selecting signals and
functions.
Name Description
• Selects the following bus signals selected
1st row
using the cross-point Flexi Pad delegation
buttons.
a)
Key bus , utility bus, DME external video bus,
DME utility bus
• Selects the following functions when utility/
shotbox bank is selected using the cross-point
Flexi Pad delegation buttons (utility/shotbox
b)
mode).
Utility command, menu shortcut, macro recall,
shotbox recall
• Selects the shifted signal on the background A
bus when the [DUAL BKGD BUS] button of the
cross-point Flexi Pad is lit (dual background
bus mode).
• Selects the following bus signals selected
2nd row
using the cross-point Flexi Pad delegation
buttons.
a)
Key bus , utility bus, DME external video bus,
DME utility bus
• Selects the following functions when utility/
shotbox bank is selected using the cross-point
Flexi Pad delegation buttons (utility/shotbox
b)
mode).
Utility command, menu shortcut, macro recall,
shotbox recall
• Selects the shifted signal on the background B
bus when the [DUAL BKGD BUS] button of the
cross-point Flexi Pad is lit (dual background
bus mode).
3rd row Selects background A bus signal.
d Cross-point Flexi Pad
Name Description
4th row Selects background B bus signal.
a) When a cross-point button is pressed, a key fill signal is selected. When a
cross-point button is pressed while pressing a delegation button, a key
source signal is selected.
b) Utility/shotbox mode functions are assigned in the Setup menu. The
settings are common to the M/E and PGM/PST banks.
For details, see "Assigning Functions to 1st Row/2nd Row Buttons of the
Cross-Point Control Block" (page 425).
Cross-point button numbers
The button numbers are labeled on the cross-point buttons.
For details, see "Cross-point control block button
numbers" (page 72).
Assigning signals to button numbers
You can assign a signal to each button number in the Setup
menu.
For details, see "Creating Cross-Point Assign Tables"
(page 413).
Colors of lit cross-point buttons
The status of cross-point buttons can be checked according
to the color of the button when lit.
For details, see "Colors of lit cross-point buttons"
(page 74).
Re-entry buttons
Re-entry buttons are assigned to the cross-point button
rows (M/E-4 and M/E-5 re-entry buttons must be assigned
in the Setup menu). Re-entry buttons can also be assigned
to the cross-point Flexi Pad.
30