Copy And Swap; Overview - Sony MVS-8000X User Manual

When selecting [Multi] and replicating the pattern
No. Parameter Adjustment
1 H Multi
Number of repetitions of pattern
horizontally
2 V Multi Number of repetitions of pattern
vertically
3 Invert Type Pattern layout
a) See page 132.
When selecting [Aspect] and adjusting the pattern
aspect ratio
No. Parameter Adjustment
1 Aspect Aspect ratio
a) See page 131.
When selecting [Pairing] and making a wipe
pattern like a Venetian blind
No. Parameter Adjustment
1 Width Width
When selecting [Angle] in the <Rotation> group
and slanting the pattern
No. Parameter Adjustment
1 Angle Rotation angle of pattern
a) See page 131.
When selecting [Speed] in the <Rotation> group
and rotating the pattern at a constant speed
No. Parameter Adjustment
1 Speed Rotation speed of pattern
a) See page 131.
When selecting H (horizontal) or V (vertical) in the
<Modulation> group and applying a wave to the
pattern
No. Parameter Adjustment
1 Amplitude Amplitude of modulation
2 Frequency Frequency of modulation
3 Speed Speed of ripples
a) See page 133.
Notes
• The modulation is always a sine wave.
• When the signal format is 1080PsF, modulation
cannot be used.
5
To interchange color 1 and color 2, press the [Color
Invert] button, turning it on.

Copy and Swap

Overview

You can copy or swap the settings between switcher banks
a)
or between keyers.
The following settings can be copied or swapped.
• Settings for the M/E banks and PGM/PST bank
• Keyer settings
• Wipe settings in a transition control block
• Independent key wipe settings in a transition control
a)
• DME wipe settings in a transition control block
• Independent key DME wipe settings in a transition
• Matte color settings (color 1, color 2, and how to
• Color settings
• DME channel settings
• Format converter input settings (copy only)
• Format converter output settings (copy only)
You can also copy settings using simple button operations
(see page 179).
a)
M/E copy and M/E swap
You can copy and swap all bank settings between the M/
E-1 and PGM/PST banks.
a)
If a DME is being used on the copy source M/E bank, then
if for example there are insufficient DME channels, it may
not be possible to select the DME.
a)
There are no such restrictions on a swap.
Keyer copy and keyer swap
You can copy and swap the key settings between keyers.
177
block
control block
compose them)
Target bank Target data
M/E-1 Bank settings, excluding the following
M/E-2 data items.
• Setup data
M/E-3
• Flexi Pad settings
M/E-4
M/E-5
• Snapshots
PGM/PST
• Keyframe effects
• Key snapshots
• Key memory
Note