Snapshot Operations (Flexi Pad Control Block); Banks And Registers - Sony MVS-8000X User Manual

Notes
• The cross-point hold and key disable settings are
maintained until you next press and release the
cross-point hold button.
• Adding a temporary attribute does not affect the
attribute settings saved in registers.
• It is not possible to add temporary attributes to a
master snapshot.
5
Press the [ENTER] button.
The specified snapshot is recalled.
When a master snapshot is recalled, the region
selection buttons are lit according to the saved region
information.
To cancel a snapshot recall operation
To cancel the snapshot recall, press the [UNDO] button.
Note
It is not possible to cancel recalling of a master snapshot.
Creating and saving a master snapshot
Use the same procedure for creating and saving a master
timeline.
For master snapshot operations, use the [SNAPSHOT]
button instead of the [EFF] button.
For details, see "Creating and Saving a Master Timeline
(Numeric Keypad Control Block)" (page 323).
Snapshot Operations
(Flexi Pad Control Block)
In the Flexi Pad control block on each M/E bank and PGM/
PST banks, you can only carry out operations on snapshots
for that bank.
SNAPSHOT button
Memory recall section
Flexi Pad control block

Banks and Registers

To allow operations on the 250 registers, the Flexi Pad
control block treats the registers in groups. These groups
are called "banks." There are 26 banks, numbered 0 to 25,
and the following registers correspond to each bank.
Bank Register
number number
Bank 0 1 to 9
Bank 1 10 to 19
Bank 2 20 to 29
Bank 3 30 to 39
Bank 4 40 to 49
Bank 5 50 to 59
Bank 6 60 to 69
Bank 7 70 to 79
333
DEL button
UNDO button
Bank selection buttons
Bank Register
number number
Bank 13 130 to 139
Bank 14 140 to 149
Bank 15 150 to 159
Bank 16 160 to 169
Bank 17 170 to 179
Bank 18 180 to 189
Bank 19 190 to 199
Bank 20 200 to 209