Setting Conversion Formats - Sony MVS-6520 User Manual

System Field frequency
HD system 50
59.94
23.976
24
50
59.94
SD system 59.94
50
1
In the Engineering Setup >System >Format menu
(7313), select the device for operations.
2
Press [Signal Format].
3
Press the button for the desired signal format.
Switching the Input Reference
Signal for HD System
Notes
The DME1 input reference signal is common to the
switcher.
In the <Ref Input Format> group of the Engineering Setup
>System >Format menu (7313), select one of the
following.
Tri Sync: Tri-level sync for an HD system
BB (Black Burst): Black burst or sync
The following table shows the relation between signal
format and the frequency of a signal that can be used as the
input reference signal.
Signal format Input reference signal
Tri Sync BB
1080i/59.94 59.94
1080i/50 50
1080PsF/24 48
1080PsF/23.976 47.952
720P/59.94 59.94
–
720P/50
314
Setting the Signal Format
Effective number of
scan lines
1080i
1080PsF
720P
480i
576i
Black Burst Sync 59.94
59.94
Black Burst 50 Sync 50
–
–
Black Burst Sync 59.94
59.94
Black Burst 50 Sync 50

Setting Conversion Formats

The format conversion is valid only when [BB] is selected
in the <Ref Input Format> group.
The format conversion is assigned to primary inputs and
outputs in advance.
For details about the assignment,
Primary Input to be Used in the Format Converter"
1 "Selecting the Output to be Used as the
(p. 348) and
Format Converter" (p.
353).
Format converter
The following video signal conversion formats are
supported by the format converter.
• Up-conversion: SD (4:3) to HD (16:9)
• Down-conversion: HD (16:9) to SD (4:3)
• Cross-conversion: HD (720P) to HD (1080i), or HD
(1080i) to HD (720P)
The number of format converter inputs and outputs can be
set to one of the following in "FC Config"
• 8 inputs, no outputs
• 4 inputs, 2 outputs
Notes
After format conversion, input and output signals have
one-frame delays with respect to the reference signals. To
synchronize converted input signals and unconverted input
signals, it is possible to delay the unconverted input signal.
1 "To delay unconverted input signals
For details,
(frame delay function)" (p.
Conversion format combinations
The combinations of switcher signal formats and
supported format converter formats are as follows.
Format converter signal format setting
Switcher signal
format setting
FC Input 1 to 8
480i/59.94 720P/59.94
1080i/59.94
576i/50 720P/50
1080i/50
720P/50 576i/50
1080i/50
720P/59.94 480i/59.94
1080i/59.94
1080i/50 576i/50
720P/50
1080i/59.94 480i/59.94
720P/59.94
1 "Selecting the
(1 p. 322).
315).
FC Output 1, 2
720P/59.94
1080i/59.94
720P/50
1080i/50
576i/50
1080i/50
480i/59.94
1080i/59.94
576i/50
720P/50
480i/59.94
720P/59.94