Sony MVS-8000X User Manual page 271

Multi format switcher system with icp-x7000 integrated control panel.
Hide thumbs Also See for MVS-8000X:
Table of Contents

Advertisement

b) Minus moves left, plus moves right.
c) Minus moves down, plus moves up.
d) Minus moves forward, plus moves toward the rear.
6
In the <Axis Select> group, select the space in which
to place the light source.
Source: Place the light source in source space. The
spotlight moves when the image moves.
Target: Place the light source in target space. The
spotlight does not move, even when the image
moves.
For details about the space in which to place the light
source, see "Linking and unlinking image and
spotlight" (page 266).
To set a test sphere
1
In the Light 1 menu (4156.3), press [Test Sphere],
turning it on.
A test sphere effect appears on the surface of the
image.
2
Set the following parameter.
No.
Parameter Adjustment
Light separation distance
5
Amp
a) Light appears from Z direction. At –100.00 the light is directed
toward the rear, at +100.00 the whole image is lit like a flat effect.
To set the illuminated area
In the <Area Select> group of the Light 1 menu (4156.3),
select one of the following.
FRGD: The light strikes the image foreground.
BKGD: The light strikes the image background.
Both: The light strikes both the image foreground and
background.
For details about the illuminated area, see "Selecting the
illuminated area" (page 266).
Notes
• When [Multiply] is selected in the <Fill Blending
Mode> group of the Light Color Adjust menu (4156.4)
(see page 271), the lighting effect is not applied to the
background, even if [BKGD] or [Both] is selected.
• When [Brilliancy] is set to 100.0 in the <Fill Source>
group of the Light Color Adjust menu (4156.4) (see
page 271), the lighting effect is not applied to the
background, even if [BKGD] or [Both] is selected.
• When the global effect combiner is set to [Mix] or
[Depth], the lighting effect is not applied to the
background, even if [BKGD] or [Both] is selected.
To set Surface Flat
In the Light 1 menu (4156.3), press [Surface Flat], turning
it on.
When other than [Flat] is selected in the <Surface Select>
group of the Spot Lighting menu (4156), only the part of
the surface being struck by the currently set light from the
light source is shown in the state as if [Flat] had been
selected.
To set the shape of the lighting
1
In the Light 1 menu (4156.3), press [Shape], turning it
on.
2
Set the following parameters.
No.
Parameter Adjustment
1
Shape Ptn
2
Size
3
Deform
4
Soft
5
Angle
a) See page 528.
b) 0 is a round shape, and 100 is the shape of the pattern. Smaller values
make the pattern more rounded.
c) –1.00 is one rotation in the counterclockwise direction. +1.00 is one
rotation in the clockwise direction.
To rotate the shape pattern
a)
1
In the Light 1 menu (4156.3), press [Shape Speed],
turning it on.
When [Shape] is selected, the display of the 5th
parameter changes.
2
Set the following parameters.
No.
Parameter Adjustment
5
Speed
a) –100.00 is four rotations per second in the counterclockwise
direction, and +100.00 is four rotations per second in the clockwise
direction. 0.00 stops the rotation.
To change the light to a ring shape
Note
When [Parallel] or [Whole] is selected in the <Spot Mode>
group, the Ring parameter cannot be set if Shape is
disabled.
1
In the Light 1 menu (4156.3), press [Ring].
2
Set the following parameters.
No.
Parameter Adjustment
1
Offset
2
Radius
270
a)
Shape pattern
Shape size
Amount of shape deformation
Softness of shape pattern
Angle of shape pattern rotation
Rotation speed and direction
Offset from center position (radius)
Radius of ring
b)
c)
a)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents