Setting The Safe Title Area; Cropping A 4:3 Mode Image In An Hd System; Setting Format Converter Outputs; Configuring Multi Viewer - Sony MVS-8000X User Manual

Setting the Safe Title Area

1
In the Engineering Setup >Switcher >Output menu
(7333), press [Safe Title].
The Safe Title menu (7333.4) appears.
2
Select the target output to set.
3
In the Misc >Safe Title menu (3221), press [Safe
Title], turning it on, to enable safe title.
4
Perform the following operations.
To display a box: Press [Box1] or [Box2], turning it
on.
To display a cross: Press [Cross], turning it on.
To display a grid: Press [Grid], turning it on.
5
Perform the following operations, according to the
selection in step 4.
When [Box1] or [Box2] is selected: Set the following
parameters.
No. Parameter Adjustment
2 Box Size Box size
Luminance Display color brightness
3
a) Adjustable for [Box2].
When [Grid] is selected: In the <Grid Size> group,
select one of the following.
80.00%: Set the grid size to 80% of the screen frame.
85.00%: Set the grid size to 85% of the screen frame.
90.00%: Set the grid size to 90% of the screen frame.
100.00%: Set the grid size to 100% of the screen
frame (full size).
6
Perform the following operations, according to the
selection in step 4.
When [Box1] or [Box2] is selected: In the <Box1
Adjust> or <Box2 Adjust> group, select the screen
aspect ratio (16:9, 14:9, 4:3).
When [Grid] is selected: In the <Grid Adjust> group,
select the screen aspect ratio (16:9, 4:3).
Cropping a 4:3 Mode Image in an HD
system
In an HD system, this allows you to crop an image having
a screen aspect ratio of 16:9 to an aspect ratio of 4:3 for
output.
1
In the Engineering Setup >Switcher >Output menu
(7333), press [4:3 Crop].
The 4:3 Crop menu (7333.5) appears.
2
Select the target output to set.
3
Press [4:3 Crop], turning it on.
Note
When a screen aspect ratio of 16:9 is selected for all banks
in the Engineering Setup >System >Format >Aspect menu
(7313.1), the [4:3 Crop] setting is disabled.

Setting Format Converter Outputs

Selecting the format converter conversion
method
Open the Engineering Setup >Switcher >Output >FC
Adjust menu (7333.6).
The operation is the similar to setting format converter
inputs.
For details, see "Selecting the Format Converter
Conversion Method" (page 439).
Copying format converter output data
a)
1
In the Engineering Setup >Switcher >Output >FC
Adjust menu (7333.6), press [Copy].
The Copy/Swap >Copy >Format Converter menu
(3121) appears.
2
In the <Data Select> group, select [Output].
3
Select the copy source and copy destination data.
4
Press [Copy].

Configuring Multi Viewer

The multi viewer is a function for splitting the screen into
sub screens and displaying assigned images in those sub
screens.
The screen can be split into 4 or 10 sub screens, and
controlled independently using a 2-system multi viewer.
A split window is referred to as a "sub screen."
444