Interpolation Settings; Crop/Border Settings - Sony MVS-8000X User Manual

4
Select the function to be set.
To change the aspect ratio of the key: Press the [ASP
PERS] button, turning it on.
To reduce/enlarge or move the key: Press the [LOC
SIZE] button, turning it on.
To rotate or change the perspective of the key;
Press the [ROT] button, turning it on. To specify
the direction of rotation, press the [X] button or
[Y] button. To adjust perspective, press the [Z]
button.
5
Use the trackball or Z-ring for the operation.
Pressing the [FINE] button, turning it on, enables fine
adjustment of setting values (fine mode).
Pressing the [X], [Y], or [Z] button, turning it on,
restricts operation to the selected axis or item.
The target bank and resizer, and the current parameter
and its value, are displayed in the display of the device
control block.
The correspondence between the operation buttons
and parameters is shown in the following table.
Parameter Trackball
Operation
(horizontal
button
rotation)
[X] button [Y] button [Z] button
ASP Aspect Change
PERS aspect ratio
on X-axis
LOC Location Move
SIZE image on
X-axis
ROT Rotation/ Rotate
Perspec- image on
tive Y-axis
To enter parameters
Operates identically to DME three-dimensional parameter
input.
For details, see "Three-Dimensional Parameter Entry"
(page 225).
To reset parameters
Operates identically to DME three-dimensional parameter
reset.
For details, see "Resetting three-dimensional
parameters" (page 225).
To return the resizer to default state (clear work
buffer)
To clear and reset to default state only the two-dimensional
transform and rotation parameters contained in the work
buffer, depending on the resizer operation, press the [CLR
WORK BUFR] button in the device control block.
To clear all of the parameters in the work buffer and reset
the resizer, press the [CLR WORK BUFR] button twice in
rapid succession.
For the default state, you can select either the factory
default settings or user settings.
For details, see "Power-On (Startup) State Selection"
(page 397).
To reset the bank to the default state
Press the [M/E DEF RCALL] button twice in rapid
succession to return the currently selected bank (M/E or
PGM/PST) to the default state.

Interpolation Settings

1
Trackball Z-ring
(vertical
2
rotation)
Change Change
aspect aspect ratio
3
on X- and
ratio on Y-
axis Y-axes
simultane-
ously
Move Magnify
image on and shrink
Y-axis image
Rotate Change
image on distance of
X-axis viewpoint
position

Crop/Border Settings

Cropping a key with resizer applied
1
2
3
119
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
In the <Resizer Effect/Rotation> group, press [Resizer
Process].
The Resizer Process menu (1115.3) appears.
Select an interpolation method.
Set the interpolation settings in the same way as for the
DME interpolation settings. However, the following
points are different.
• The <Interpolation Mode> mode group settings can
be set for any type of signal format.
• The anti-moiré filter cannot be set.
For details, see "Interpolation Settings" (page 274).
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
In the <Resizer Effect/Rotation> group, press [Border/
Crop].
The Border/Crop menu (1115.2) appears.
Press [Crop], turning it on.