Clip Creation; Creating And Managing Frame Memory Folders; Creating A Folder - Sony MVS-8000X User Manual

To stop playback, press the [STOP], [SHTL], [JOG],
[CUE], [REW], [FF], or [ALL STOP] button.
For details about the buttons in the device control block
(trackball), see "Device Control Block (Trackball)"
(page 40) and "Controlling the Tape/Disk Transport"
(page 288).
To specify the playback start point
To make the current position the playback start point, press
the [START TC] button.
To specify the playback stop point
Start playback, and at the desired position press the
[STOP] button to stop playback, then press the [STOP TC]
button.
To apply a loop to a frame memory clip
Press the [FM LOOP] button.
To control variable speed playback
Press any of the [SHTL], [JOG], and [VAR] buttons, then
turn the Z-ring. The image changes in the forward
direction when you turn the Z-ring clockwise, and in the
reverse direction when you turn it counterclockwise.
When the [JOG] button is pressed: Playback is at a
speed corresponding to the turning speed of the Z-ring.
When the [SHTL] button is pressed: Playback is at a
speed corresponding to the angle of the Z-ring.
When the [VAR] button is pressed: Playback is at a
speed in the range –1 to +3 times normal speed
corresponding to the angle of the Z-ring.

Clip Creation

You record a movie as a clip.
Note
If the number of frame memory clips exceeds 100 single
files (50 pair files), an error appears.
Recording a clip
1
Open the Frame Memory >Clip >Record menu (2523).
Frame memory selection area
Target selection buttons Folder selection area
2
With [Pair] not lit, press a target selection button to
select the target.
3
In the folder selection area, select the folder to save the
clip you want to record.
4
In the <Record Enable> group, select the clip type.
Clip: Normal clip
Ext Clip: Extended clip
5
To set the clip name, press [Name].
Enter the clip name using the keyboard window, and
press [Enter].
6
To start recording, press [Record Start].
7
To stop recording, press [Record Stop].
To set the clip duration
1
Press [Clip Duration].
2
Enter a timecode value or number of frames using the
keyboard window, and press [Enter].
Creating and Managing Frame
Memory Folders
You can create, rename, and delete frame memory folders.

Creating a folder

1
Open the Frame Memory >Folder menu (2551).
166
Pair selection buttons