Sony MVS-8000X User Manual page 39

Button name Description
• Assigns key 1 to key 8.
KEY1 to KEY8
• Press and hold a [KEY1] to
[KEY8] button and press a [M/E1]
to [M/E5] or [P/P] button to return
the settings of the selected key to
the defaults.
• Used to check the DME channel
TRANS (transition)
used for DME wipes on the M/E
or PGM/PST bank.
• You can select the DME channel
to be used beforehand when a
DME wipe is selected as the
transition type.
• Press and hold the [TRANS]
button and press a [KEY1] to
[KEY8] button to enable
independent key transition
operation.
SUB TRANS (sub In Multi Program 2 mode, used as
transition) the [TRANS] button on the sub
side.
For details about Multi Program 2
mode, see "Multi Program 2"
(page 197).
b DME channel selection buttons
These selects the DME channel to assign to a keyer.
When the [TRANS] or [SUB TRANS] delegation button is
selected, the DME channel used by the DME wipe is
displayed. You can select the DME channel to be used
beforehand when a DME wipe is selected as the transition
type.
c ON AIR indicators
These indicators are lit red when the corresponding DME
channels are included in the final program output.
d Setting buttons
These buttons are used to adjust keys.
The settings button assignments are different in the shifted
and unshifted states, and you can switch between them
using the [SHIFT] button.
The functions set in each button can be viewed in the
setting buttons display section.
Setting buttons display area: Shifted state
Key type selection buttons
These buttons select the key type.
Press a button to view the parameters on the display, and
use the adjustment knobs to change settings.
• LUM (luminance key)
• LIN (linear key)
• CRK (chroma key)
• PTN (key wipe pattern key)
For details, see "Key Operations (Key Control Block)"
(page 112).
Key fill/key source selection buttons
These buttons select the key fill and key source.
• AUTO SEL (auto select)
• SPLT (split)
• MAT FILL (matte fill)
For details, see "Key Operations (Key Control Block)"
(page 112).
Key modifier buttons
These buttons modify the edges of keys.
Press a button to view the parameters on the display, and
use the adjustment knobs to change settings.
• BDR (border)
• DROP BDR (drop border)
• SHDW (shadow)
• SOFT EDGE
For details, see "Key Adjustments (Key Control Block)"
(page 114).
Resizer operation buttons
These buttons zoom, move, and rotate keys using a resizer.
Press a button to view the parameters on the display, and
use the adjustment knobs to change settings.
• RSZR (resizer)
• ROT X (rotation X)
• ROT Y (rotation Y)
39
SHFT button