Sony MVS-8000X User Manual page 72

Control block Bus name
AUX bus control AUX1 bus to AUX48 bus
block
Frame memory source 1 bus
Frame memory source 2 bus
Color corrector 1 path
Color corrector 2 path
Edit preview bus
DME1 video bus to DME8 video
bus
DME1 key bus to DME8 key bus
M/E-1 UTILITY 1 and 2 buses
M/E-2 UTILITY 1 and 2 buses
M/E-3 UTILITY 1 and 2 buses
M/E-4 UTILITY 1 and 2 buses
M/E-5 UTILITY 1 and 2 buses
P/P UTILITY 1 and 2 buses
M/E-1 key 1 fill to key 8 fill buses
M/E-2 key 1 fill to key 8 fill buses
M/E-3 key 1 fill to key 8 fill buses
M/E-4 key 1 fill to key 8 fill buses
M/E-5 key 1 fill to key 8 fill buses
DSK1 to DSK8 fill buses
M/E-1 key 1 to key 8 source buses
M/E-2 key 1 to key 8 source buses
M/E-3 key 1 to key 8 source buses
M/E-4 key 1 to key 8 source buses
M/E-5 key 1 to key 8 source buses
DSK1 to DSK8 source buses
M/E-1 DME external video bus
M/E-2 DME external video bus
M/E-3 DME external video bus
M/E-4 DME external video bus
M/E-5 DME external video bus
P/P DME external video bus
DME utility 1 bus
DME utility 2 bus
a) For buttons that not set by default, assignment is required in the Setup
menu.
b) Dual background bus mode can be selected.
Dual background bus mode
You can select the background A bus (3rd row) shifted
signal in the 1st row, and the background B bus (4th row)
shifted signal in the 2nd row.
To set dual background bus mode, press the [DUAL
BKGD BUS] button on the cross-point Flexi Pad, turning
it on.
Delegation operation
Cross-point button
rows
3rd row, 4th row Press the [AUX 1] to [AUX 48] buttons in the 1st
row/2nd row, turning them on.
3rd row, 4th row Press the [FMS 1] button and [FMS 2] button in
the 1st row/2nd row, turning them on.
3rd row, 4th row Press the [CCR 1] button and [CCR 2] button in
the 1st row/2nd row, turning them on.
3rd row, 4th row Press the [EDIT PVW] buttons in the 1st row/2nd
row, turning them on.
3rd row, 4th row Press the [DME1 V] and [DME8 V] buttons in the
1st row/2nd row, turning them on.
3rd row, 4th row Press the [DME1 K] and [DME8 K] buttons in the
1st row/2nd row, turning them on.
3rd row, 4th row Press the following buttons in the 1st row/2nd
row, turning them on.
[M/E1 UTIL1] button, [M/E1 UTIL2] button
[M/E2 UTIL1] button, [M/E2 UTIL2] button
[M/E3 UTIL1] button, [M/E3 UTIL2] button
[M/E4 UTIL1] button, [M/E4 UTIL2] button
[M/E5 UTIL1] button, [M/E5 UTIL2] button
[P/P UTIL1] button, [P/P UTIL2] button
3rd row, 4th row
Press the following buttons in the 1st row/2nd
row, turning them on.
[M/E1 KEY1 V] to [M/E1 KEY8 V] buttons
[M/E2 KEY1 V] to [M/E2 KEY8 V] buttons
[M/E3 KEY1 V] to [M/E3 KEY8 V] buttons
[M/E4 KEY1 V] to [M/E4 KEY8 V] buttons
[M/E5 KEY1 V] to [M/E5 KEY8 V] buttons
[DSK1 V] to [DSK8 V] buttons
3rd row, 4th row Press the following buttons in the 1st row/2nd
row, turning them on.
[M/E1 KEY1 K] to [M/E1 KEY8 K] buttons
[M/E2 KEY1 K] to [M/E2 KEY8 K] buttons
[M/E3 KEY1 K] to [M/E3 KEY8 K] buttons
[M/E4 KEY1 K] to [M/E4 KEY8 K] buttons
[M/E5 KEY1 K] to [M/E5 KEY8 K] buttons
[DSK1 K] to [DSK8 K] buttons
3rd row, 4th row Press the following buttons in the 1st row/2nd
row, turning them on.
[M/E1 DME EXT] button
[M/E2 DME EXT] button
[M/E3 DME EXT] button
[M/E4 DME EXT] button
[M/E5 DME EXT] button
[P/P DME EXT] button
3rd row, 4th row Press the [DME UTIL1] and [DME UTIL2]
buttons in the 1st row/2nd row, turning them on.
Notes
• The [DUAL BKGD BUS] button requires an assignment
to have been made in the Setup menu (see page 430).
• For the following state of the switcher banks, dual
background bus mode is not available.
- When set to [Dual M/E Assign]
- When the operation mode (M/E Config) is set to DSK
mode
72
a)