Setting A Frame Synchronizer; Setting A Format Converter - Sony XVS-G1 User Manual

Setting a Frame Synchronizer

When a frame synchronizer is enabled, unsynchronized
input signals are synchronized.
1
Open the Home > Setup > System > Input > Input
Adjust menu (19101.31).
2
Select the target input to set.
To select and set multiple inputs, place a check mark
beside the target inputs to set.
To select and set all inputs, place a check mark in the
Select All checkbox.
3
Set the [Frame Synchronizer] switch to the on state.
To disable a frame synchronizer, set the [Frame
Synchronizer] switch to the off state.

Setting a Format Converter

When the system signal format is 2160P, you can use a
format converter on odd-numbered inputs.
When the system signal format is 1080P or 1080i, you can
use a format converter on inputs 1 to 24.
Setting the conversion format
You can set the signal format of an input signal to convert
by the format converter.
Note
Field frequency and frame frequency conversion is not
supported.
The signal formats that can be converted are given below.
System signal format
(frequency)
2160P 2SI
(59.94, 50)
1080P
(59.94, 50)
1080i
(59.94)
1080i
(50)
a) Only the first number input in each group of four inputs can be set. The
settings of the inputs in each group are linked and change accordingly.
Signal format of input
signal
1080i
1080P
a)
2160P 2SI 3G
2160P 2SI 12G
720P
1080i
1080P
480i
720P
1080i
576i
720P
1080i
1
Open the Home > Setup > System > Input > FC Format
menu (19101.32).
2
Select the target input to set.
To select and set multiple inputs, place a check mark
beside the target inputs to set.
To select and set all inputs, place a check mark in the
Select All checkbox.
3
Press the [FC Format] button and select an input signal
format from the pull-down list.
Adjusting the conversion method
The conversion method adjustment items and the target
conversion formats are given below.
Adjustment item
Up-converter
conversion mode
I/P converter conversion
mode
Up-converter aspect
ratio
1
Open the Home > Setup > System > Input > FC Adjust
menu (19101.33).
2
Select the target input to set.
To select and set multiple inputs, place a check mark
beside the target inputs to set.
To select and set all inputs, place a check mark in the
Select All checkbox.
3
Adjust the conversion method.
To set the up-converter conversion mode
Press the [Conversion] button and select a conversion
mode from the pull-down list.
Frame: Conversion in frame units
Field: Conversion in field units
Adaptive: Detects motion in the signal, and automatically
switches mode between conversion in frame units and
field units.
When [Adaptive] is selected, press the [Motion] button
and enter a detection sensitivity (1 to 4) in the numeric
keypad window.
1: Highest proportion converted from frames (still image
priority mode).
2: Higher proportion converted from frames.
3: Higher proportion converted from fields.
4: Highest proportion converted from fields (motion
priority mode)
291
Conversion format
• 480i t 1080i
• 576i t 1080i
• 1080i t 2160P
• 1080i t 1080P
• 480i t 1080i
• 576i t 1080i