Sony MVS-8000X User Manual page 157

a Target selection buttons
Ancillary data indicator
Extended clip indicator
Reposition/lock indicator
The border color shows the status as follows.
Blue: Selected as the reference
Orange: Selected, but not the reference
Black: Not selected
Still/duration indicator
Press one of these to select which of the selected outputs
(FM1 and FM2 in the above figure) the operation applies
to.
The following information appears on the button.
Status indicator
File name (e.g. image001) and thumbnail: When a file is
output
Black: When a black signal is output
Through: When the input image is output
Freeze: When a freeze is output
Record: When continuously capturing images (recording)
Still/duration indicator
When a still image is selected, "Still" is shown. When a
clip is selected, a duration indication (such as "00:00:10")
is shown.
Reposition/lock indicator
This shows "R" when the reposition function (see
page 160) is enabled, and shows "L" when the lock
function (see page 161) is enabled.
Extended clip indicator
For an extended clip, "E" appears.
Clip with ancillary data indicator
For a clip with ancillary data, "A" appears.
b Auto store status indicator
This appears when the auto store function is enabled in the
Setup menu.
c Storage capacity indicator
This shows the remaining number of frames. When no
more frames can be stored, in pair mode "1" or "0" appears
in red, and in single mode "0" appears in red.
Status indicator
156
The lower figure shows the remaining number of frames
that can be used as an extended clip.
Note
When the signal format is 1080P, each time a still image is
saved the remaining space is reduced by two frames.
d Pair selection buttons
Select the pair to be displayed in the target selection
buttons.
In the following figure, the FM1 and FM2 pair is selected.
Status indicator
The border color shows the status as follows.
Blue: Selected as the reference
Orange: Selected, but not the reference
Black: Not selected
The following information appears on the button.
Status indicator
For a pair, the status is displayed on the reference side.
Thumbnail: When a file is output
Black: When a black signal is output
Through: When the input image is output
Freeze: When a freeze is output
Record: When continuously capturing images (recording)
e File selection area
You can select from the displayed still image files or clip
files.
File information detail display
Selected file
Thumbnail indications
Still image files and clip files: Still image file buttons are
gray, and clip file buttons are yellow.