Managing Images Using A Ddr/Vtr; High-Speed Backup And Restoring - Sony MVS-8000X User Manual

3
Check the message, then press [Yes].
The file recall operation starts.
4
Check the message, then press [OK].
Managing Images using a
DDR/VTR

High-speed Backup and Restoring

You can save all files currently held in frame memory as a
backup data set, by high-speed recording on video tape or
other medium.
To restore the file and folder structure, it is necessary to
save the automatically generated file list (of file name,
length of clip, and so on) in memory.
Notes
• At the beginning of the backup data, a red or blue image
is automatically inserted when the data is created. Do not
delete this image, as it is required for restoring the data.
• When set to Dual Simul mode, this function cannot be
used.
High-speed recording of backup data to
DDR or VTR
Note
Before starting the backup, it is necessary to select the
target FM output to record on an AUX bus, for example,
and input the AUX output to the DDR/VTR.
1
Open the Frame Memory >External Device >Backup
to DDR/VTR menu (2564).
2
To record with ancillary data, output the frame
memory output signal on the AUX bus.
3
In the <Backup Enable> group, select one of the
following.
Clip/Still: Data from the first board (still images and
clips)
Ext Clip: Data from the second board (extended clips)
4
Press [Backup Start].
When the backup preparation is completed, a
confirmation message appears.
5
Start recording on the external device, and then
immediately press [Yes].
The backup starts, and a message appears when the
backup is completed.
173