Roll Settings; Cylinder Settings; Sphere Settings; Explosion Settings - Sony MVS-8000X User Manual

• For the MKS-7470X/7471X, the same restriction as
above applies when the signal format is 1080P only.

Roll Settings

There are four modes: H&V, H, V, and Off. You can select
the turn position, the radius of the turned portion, the
amount and angle of turning, and the input video for the
front and back pages.
Applying the Roll effect
Open the Non Linear >Roll menu (4141.20).
The items and parameters displayed in the Roll menu are
the same as for the Page Turn menu (see page 255).
Note
When using a roll effect with one channel, the following
restrictions apply.
• In an MVE-8000A HD system, when the input is for
example a title, parts of the back page other than the title
appear as black.
• For the MKS-7470X/7471X, the same restriction as
above applies when the signal format is 1080P only.

Cylinder Settings

You can set the degree of winding onto the cylinder, the
radius, the horizontal position of the wound image, and
front and back side output for the image.
Applying the Cylinder effect
In the Non Linear >Cylinder menu (4141.21), set the
following parameters.
No. Parameter Adjustment
1 Radius Degree to which image is wound onto
the cylinder
2 Min R Radius of the cylinder
3 Offset Horizontal position of the image wound
onto cylinder
To set the input signal for the back image
The operation is the same as for the <Back Video> group
of the Page Turn menu (4141.19) (see page 255).
Note
When using a cylinder effect with one channel, the
following restrictions apply.
• In an MVE-8000A HD system, when the input is for
example a title, parts of the inner surface other than the
title appear as black.
• For the MKS-7470X/7471X, the same restriction as
above applies when the signal format is 1080P only.

Sphere Settings

You can set the degree of wrapping onto the sphere, the
radius, the horizontal position of the wrapped image, and
front and back side output for the image.
Note
You cannot monitor the part of a rotating sphere that
corresponds to the axis on the monitor screen.
Applying the Sphere effect
Open the Non Linear >Sphere menu (4141.22).
The items and parameters displayed in the Sphere menu
are the same as for the Cylinder menu (see page 256).
Note
When using a sphere effect with one channel, the
following restrictions apply.
• In an MVE-8000A HD system, when the input is for
example a title, parts of the inner surface other than the
title appear as black.
• For the MKS-7470X/7471X, the same restriction as
above applies when the signal format is 1080P only.

Explosion Settings

You can set the pattern shape and aspect ratio, the center
position, the amount of movement by fragments, the
curvature of the transition path, and other parameters.
Applying the Explosion effect
1
In the <Mode> group of the Non Linear >Explosion
menu (4141.25), select the explosion shape.
Circle: Circular shape
Rectangle: Rectangular shape
Star: Star shape
Heart: Heart shape
Ellipse: Elliptical shape
2
Set the following parameters, according to the selected
shape.
When [Circle] is selected
No. Parameter Adjustment
1 Transition
2 Curve
256
Degree of transition
Degree of image periphery
expansion