Sony MVS-8000X User Manual page 556

Icon Message
Specified FM OutCh was locked (–7).
Restore failed, some Clip files cannot
be deleted on this board (–8).
Not enough free register area for
Backup or Restore process (–10).
Prepare failed, insufficient Clip id
(–15).
Restore failed, Cannot find symbol
files on this tape (–18).
ERROR (–19). Bad register number.
Restore failed, file name already exist,
try to rename but unsuccessful (–20).
Cannot find the File Name Data,
please load the File Name Data first
(–21).
Set Time/Date
Error: Wrong Format.
Trim
The Start TC or Stop TC is not
properly set.
This file is locked.
This file is using for playback.
Warning
This operation will be canceled,
because the register is locked.
Please change the register status to
be unlocked first.
No Switcher information available.
Please confirm "Network
Configuration" on Page 7311.
Description
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, the specified frame memory output
channel was locked.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, restoring failed because a clip file could
not be deleted.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, there was insufficient capacity to carry
out the restore operation.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, there were insufficient Clip IDs (internal
processing error).
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, a marker frame file could not be found.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, Register Number was an invalid value
(internal processing error).
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, renaming failed.
2565: Frame Memory >External Device >Restore from DDR/VTR
When [Restore Start] was pressed, the file list was not loaded.
7317: Engineering Setup >System >Maintenance
A correct date and time was not specified. Specify the correct date and time.
2522: Frame Memory >Clip >Play
When [Trim] was pressed, neither the Start TC nor the Stop TC was set.
2522: Frame Memory >Clip >Play
When [Trim] was pressed, the interval between Start TC (or Clip Begin) and
Stop TC (or Clip End) was the entire clip.
2522: Frame Memory >Clip >Play
When [Trim] was pressed, the Start TC (or Clip Begin) value was greater
than the Stop TC (or Clip End) value.
2522: Frame Memory >Clip >Play
When [Trim] was pressed, the file was locked.
2522: Frame Memory >Clip >Play
When [Trim] was pressed, the target file was being played back.
6211.1: Effect >Master Timeline >Store >Edit
6311.1: Snapshot >Master Snapshot >Store >Edit
6411.1: Shotbox >Register >Store/Recall >Edit
When [Store] was pressed, the target register was locked. Unlock the
register before executing [Store].
When starting up the menu system, the switcher was not present in the
system information. Check the LAN connections, and retry [Auto Config] in
menu 7311 (Engineering Setup > System > Network Config).
554