Key Priority Settings; Setting The Key Priority (Transition Control Block) - Sony MVS-8000X User Manual

Key Priority Settings

If a number of keys are already inserted in the current
video, you can check or change the overlay sequence (key
priority).
When a key priority ([KEY PRIOR] button) is selected as
the next transition, you can also change the key priority
when switching to the new video.
The key priority values are from 1 to 4, with a higher
priority key being "in front" as seen on the screen.
Priority 2
Priority 1
Priority 4
Priority 3
You can set the key priority for keys inserted in the current
video and for keys after the transition.
The key priority setting can be set using either the [PRIOR
SET] button in the transition control block, or using the
Misc >Key Priority menu for the M/E or PGM/PST bank.
Notes
• When the operating mode is set to multi program, the
key priority setting cannot be made.
• When the signal format is set to 1080P, key 5 to key 8
cannot be used.
Setting the Key Priority (Transition
Control Block)
Next transition selection buttons
PRIOR SET button
KEY PRIOR button
Transition control block
Changing the key priority
Key priority: 3, 1, 4, 2
Key priority: 1, 3, 4, 2
1
Press and hold the [PRIOR SET] and press the [KEY
PRIOR] button to select key priority setting mode.
When the [KEY PRIOR] button is lit green, key
setting mode for after the transition is selected. When
78
Select [KEY1].