Effect Settings - Sony MVS-8000X User Manual

Effect Settings

Restrictions on resizer effects
Restrictions on the use of effects
Of the resizer effects, using mask, drop shadow, or wide
key border requires two resizer hardware units. These are
called "dual resizer effects."
In a dual resizer effect, predetermined combinations of key
1 and key 2, key 3 and key 4, key 5 and key 6, key 7 and
key 8 are used.
For example, if the resizer is enabled on either key 1 or key
2, the other key cannot be used for a dual resizer effect.
The same restriction applies when using a resizer DME
wipe in place of resizer.
There are also restrictions on the combination of effects
that can be used simultaneously on the same keyer.
Unavailability of simultaneous use within the
same keyer
The following combinations of resizer effects cannot be
enabled simultaneously.
• Mosaic and edge enhance
• Defocus and wide key border
• Mask and drop shadow
• Mask and wide key border
Resizer effects setting menu
1
In the M/E-1 >Key1 >Processed Key/Resizer menu
(1115), press [Resizer], turning it on.
2
In the <Resizer Effect/Rotation> group, press
[Enhanced Effect].
The Enhanced Effect menu (1115.4) appears.
Setting a wide key border
1
In the M/E-1 >Key1 >Processed Key/Resizer
>Enhanced Effect menu (1115.4), press [Dual Rszr
Effect], turning it on.
2
Press [Wide Key Border], turning it on.
3
Set the following parameters.
No. Parameter Adjustment
1 H
2 V
3 All
a)
Soft
4
5 Density
a) Common to the [Soft] drop shadow parameter.
4
To add an outline, press [Outline], turning it on.
5
To adjust the border color, press [Border Color].
6
Set the following parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
Setting a drop shadow
1
In the M/E-1 >Key1 >Processed Key/Resizer
>Enhanced Effect menu (1115.4), press [Dual Rszr
Effect], turning it on.
2
Press [Drop Shadow], turning it on.
3
Set the following parameters.
No. Parameter Adjustment
1 H
2 V
3 Size
a)
4 Soft
5 Density
a) Common to the [Soft] wide key border parameter.
Setting an edge enhance
Adjusting the gain sharpens the image.
1
In the M/E-1 >Key1 >Processed Key/Resizer
>Enhanced Effect menu (1115.4), press [Edge
Enhance], turning it on.
121
Simultaneously adjust border width
of left and right edges
Simultaneously adjust border width
of top and bottom edges
Simultaneously adjust border width
on all edges
Softness of border
Border density
Saturation
Hue
Horizontal position of shadow
Vertical position of shadow
Size
Softness
Density of shadow