Sony MVS-8000X User Manual page 525

Menu number Menu
7336.5 Engineering Setup >Switcher >Link >GPI Link
>GPI Link Adjust
7336.6 Engineering Setup >Switcher >Link >M/E Link
7336.7 Engineering Setup >Switcher >Link >Key
Transition Link
Engineering Setup >Switcher >Device Interface
7337.2
>GPI Input
Engineering Setup >Switcher >Device Interface
7337.4
>GPI Output
Engineering Setup >Switcher >Device Interface
7337.6
>DME Type Setting
Engineering Setup >Switcher >Device Interface
7337.7
>DME Type Setting >DME SDI I/F
7341 to 7344 Engineering Setup >DME
7352 Engineering Setup >DCU >GPI Input Assign
7354 Engineering Setup >DCU >GPI Output Assign
a) You can change the banks that are not used to P/P, M/E-3, and M/E-4 on the MVS-8000X, and to P/P and M/E-2 to M/E-5 on the MVS-7000X. This operation
is configured in the Engineering Setup >Switcher >Config >Logical M/E Assign menu (7331.5).
b) The menu numbers shown by way of example are those for M/E-1. The same applies for the M/E-2 to M/E-5, and PGM/PST menus.
c) Functions only when [Speed] is set after pressing [Angle].
d) Operation not supported for 4K format images. Operation is only supported on the four divided sub-images.
Disabled operations/settings
• Settings relating to M/E-2 to M/E-4 on the MVS-8000X
and settings relating to M/E-1 to M/E-5 on the MVS-
a)
7000X
• Settings relating to M/E-x and P/P Key3 to Key8
• M/E-x, P/P Utility1, Utility2, Utility3, and DME External
settings
• Frame Memory Source1 and Frame Memory Source2
settings
• AUX11 to AUX48 settings
• DME Utility1, DME Utility2, CCR1, and CCR2 settings
Settings relating to M/E-2 to M/E-4 on the MVS-8000X and
settings relating to M/E-1 to M/E-5 on the MVS-7000X
• Settings relating to M/E-2 to M/E-4 on the MVS-8000X
and settings relating to M/E-1 to M/E-5 on the MVS-
a)
7000X
• Settings relating to M/E-x and P/P Key3 to Key8
• Settings relating to M/E-2 to M/E-4 on the MVS-8000X
and settings relating to M/E-1 to M/E-5 on the MVS-
a)
7000X
• The following action settings:
- Settings relating to Key3 to Key8
- Settings relating to frame memory
- Settings relating to Aspect
- Settings relating to Side Flags
• Settings relating to M/E-2 to M/E-4 on the MVS-8000X
and settings relating to M/E-1 to M/E-5 on the MVS-
a)
7000X
• The following action settings:
- Settings relating to Key3 to Key8
All menu operations
All menu operations
All menu operations
• Settings relating to M/E-2 to M/E-4 on the MVS-8000X
and settings relating to M/E-1 to M/E-5 on the MVS-
a)
7000X
• The following action settings:
- Settings relating to Key3 to Key8
- Settings relating to frame memory
- Settings for primary signals that cannot be selected
using AUX bus when the action is Aux ? O'ride Src ??
- Settings relating to Aspect
• Settings relating to M/E-2 to M/E-4 on the MVS-8000X
and settings relating to M/E-1 to M/E-5 on the MVS-
a)
7000X
• The following action settings:
- Settings relating to Key3 to Key8
523
a)