Interconversion Of Frame Memory Clips And Extended Clips; Creating Frame Memory Folders - Sony MVS-8000X User Manual

The File Edit menu (7131.1) appears.
You can also select a device and specify a directory in
this menu (see page 379).
3
Select the file to delete.
You can select more than one file.
To select all files, press [ALL].
4
Press [Delete].
5
Check the message, then press [Yes].
Deleting frame memory files
Notes
• In a still image file saved in the 1080P signal format,
there are two still image files for each frame image.
When a register is selected for the operation, deleting
one still image file will automatically delete the other
paired file.
• When a device other than a register is selected for the
operation, deleting one still image file does not
automatically delete the other paired file. You must
manually delete both files.
For frame memory file operations, frame memory folder
specification and data type selection is required.
Perform the following operation using the procedure in
"Deleting Files" (page 381).
• In step 2, specify the frame memory folder.
In the device selection area, press [DEFAULT] (default
setting), then select the target folder in the pull-down
menu.
• After step 2, select the data type to display using the
buttons above the list.
Still: Still image files
Clip: Clip files
Ext Clip: Extended clip files
All: All file types
Interconversion of Frame Memory
Clips and Extended Clips
Frame memory clips and extended clips on the local drive
or a removable drive can be converted to extended clips
and clips, respectively.
Note
When the signal format is 1080P, this operation is not
possible.
1
Open the File >Frame Memory >Frame Memory
menu (7151).
2
Press [File Edit].
The File Edit menu (7151.1) appears.
3
In the device selection area, select [Local Drive] or
[Removable Drive], then specify a directory and frame
memory folder.
4
Select the data type to display using the buttons above
the list.
Clip: Clip files
Ext Clip: Extended clip files
5
Select the file to convert.
6
Convert the file.
To convert clips to extended clips, press [Clip > Ext
Clip.
To convert extended clips to clips, press [Ext Clip >
Clip].

Creating Frame Memory Folders

You can create a frame memory folder on the local drive
or removable drive.
1
Open the File >Frame Memory >Frame Memory
Folder menu (7152).
2
In the device selection area, select [Local Drive] or
[Removable Drive], then specify a directory.
3
Press [New].
4
Enter a name of up to 8 characters in the keyboard
window, and press [Enter].
Notes
• The following names cannot be used.
Default, Flash1, Flash2
CON, PRN, AUX, CLOCK$, NUL
COM0, COM1, COM2, COM3, COM4, COM5,
COM6, COM7, COM8, COM9
LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6,
LPT7, LPT8, LPT9
• It is not possible to create 12 or more directories in
the frame memory folder.
To rename a frame memory folder
1
Select a frame memory folder.
2
Press [Rename].
383