Frame Memory Clip Operations; Preparations; Recalling Clips (Recall) - Sony MVS-8000X User Manual

Frame Memory Clip
Operations
Note
When a pair is assigned to the target selection buttons
during playback of a frame memory clip (see page 165),
frame memory operations may not be executed correctly.
Carry out frame memory operations after stopping clip
playback.

Preparations

The preparations for using a frame memory clip
(hereinafter, a "clip") are the same as for a still image
operation.
For details, see "Preparations" (page 155) and
"Selecting Outputs and Target Frame Memory"
(page 157).

Recalling Clips (Recall)

Recalling a clip
You can recall a clip from frame memories 1 to 8.
1
Open the Frame Memory >Clip >Recall menu (2521).
When [Pair] is lit, only pair files (sets of main file and
sub file) are shown.
When [Pair] is not lit, both single files and pair files are
shown.
Frame memory
selection area
Target selection
buttons
Clip file selection area
2
In the frame memory selection area, select the frame
memory to be assigned (see page 157).
3
If [Direct Recall] is lit, press [Direct Recall], turning it
off.
4
In the frame memory folder selection area, select the
desired folder.
By pressing [More] to switch the display, you can
select from a maximum of 12 folders.
5
Press the thumbnail of the clip you want to recall.
6
Press [Recall].
The clip file is recalled the clip file, and is assigned to
the frame memory selected in step 2.
If a clip is selected when [Pair] is lit, the main file is
output to FM1, and the sub file to FM2. If either FM1
or FM2 is selected when [Pair] is not lit, the front
thumbnail file is output.
To recall in direct recall mode
Direct recall is a mode in which pressing a thumbnail
immediately recalls the file.
In direct recall mode, only the front thumbnail file is
recalled.
1
In step 6 in "Recalling a clip" (page 164), press
[Direct Recall] instead of [Recall].
2
Press the thumbnail for the file you want to recall.
164
Pair selection buttons
Frame memory folder
selection area
Direct Recall button
Find button