Three-Dimensional Parameter Display - Sony MVS-8000X User Manual

Functions assignable to trackball and Z-ring operations
Button Operation Trackball
space X-direction
LOC Source/ Move
XYZ target image on
space X-axis
ROT Source/ Rotate
target image on
space Y-axis
SHIFT Source/
Rotate
+ ROT target
image on
space Y-axis (Spin
mode)
AXIS Source Move X-
axis of
LOC space
rotation
LOC Source/ Move
SIZE target image on
space X-axis
ASP Source Change
PERS space aspect ratio
on X-axis
Target Shift view
space point on
X-axis
SHIFT
Source Change
+ ASP space skew on
PERS X-axis
Three-Dimensional Parameter
Display
You can check the values of three-dimensional parameters
in the DME menu or on the device control block
(trackball).
Display in the DME menu
The status area of the DME menu shows the three-
dimensional parameters currently controlled by the device
control block.
• When multiple DME channels are selected, this shows
the parameters for the reference channel.
• When both Global and Local are selected, the three-
dimensional parameters are shown for the channel (the
reference channel) for which the button is lit green.
Trackball Z-ring
Y-direction
Move image Move image on
on Y-axis Z-axis
Rotate Rotate image
image on X- on Z-axis
axis
Rotate Rotate image
image on X- on Z-axis (Spin
axis (Spin mode)
mode)
Move Y-axis Move Z-axis of
of rotation rotation
Move image Magnify and
on Y-axis shrink image
Change Change aspect
aspect ratio ratio on X- and
on Y-axis Y-axes
simultaneously
Shift view Change
point on distance of
Y-axis viewpoint
position
Change Change aspect
skew on ratio on X- and
Y-axis Y-axes
simultaneously
224
a) This shows one of Local Target, Local Source, Global
Target, and Global Source.
b) This shows one of Loc XYZ, Loc Size, Rot, Spin, Axis Loc,
Skew, Asp, and Pers.
To display a detailed list of three-dimensional
parameters
In the DME menu, press the menu title button (the [DME]
in the upper left part of the screen).
The DME >Status menu (4100) appears. This menu shows
the three-dimensional parameters for the DME reference
channel currently selected in the device control block.
Display on the device control block
The following information appears on the display of the
device control block (trackball).
• Reference channel name: DME1 to DME8
• Currently selected three-dimensional space: LOCAL/
GLB and SRC/TRGT
• Currently selected parameter item: LOC XYZ, ASP
PERS, LOC SIZE, ROT, AXIS LOC, SPIN, SKEW
• Parameter setting values
Type of three-
a)
dimensional space
Three-dimensional
transform operation
b)
mode
Value of X
Value of Y
Value of Z