Dme Wipes; Frame Memory; Color Backgrounds; Copy And Swap - Sony MVS-8000X User Manual

You can also specify the wipe direction, or set the pattern
position, applying various changes and modifiers to the
selected wipe pattern.
For details, see "Wipes" (page 125).

DME Wipes

A DME wipe is a wipe transition that uses a DME effect to
change from one video image to the next.
There are two types of DME wipe: those which can be
selected for a normal transition, and those which can be
selected for an independent key transition.
The patterns that can be used for a DME wipe are as
follows.
Slide, Squeeze, Split, Door, Flip tumble, Mirror, Sphere,
Character trail, Wave, Ripple, Page turn, Roll, Frame in-
out, Picture-in-picture, 2D trans, 3D trans, Sparkle, Split
slide, Mosaic, Defocus, Brick, and User programmable
DME
You can also specify the wipe direction, or set the pattern
position, applying various changes and modifiers to the
selected DME wipe pattern.
Resizer DME wipes
Using the resizer, you can carry out key DME wipes.
For details, see "DME Wipes" (page 138).

Frame Memory

Frame memory is a function for using a still image or video
(frame memory clip) as material for editing.
You can create a still image by capturing a frame of input
video or a clip by specifying a range of input video. The
created images and clips can be written to memory for
playback, editing, and output.
For details, see "Frame Memory" (page 153).

Color Backgrounds

This function can be used to obtain color background
video.
Two color signals generated from the dedicated generators
can be switched or mixed, and then output.
For details, see "Color Backgrounds" (page 176).

Copy and Swap

This function can be used to copy and swap the settings
between M/E banks and PGM/PST bank, and between
keyers.
The following settings can be copied or swapped.
• Settings for the M/E banks and PGM/PST bank
• Keyer settings
• Wipe settings in a transition control block
• Independent key wipe settings in a transition control
block
• DME wipe settings in a transition control block
• Independent key DME wipe settings in a transition
control block
• Matte color settings (color 1, color 2, and how to
compose them)
• Color settings
• DME channel settings
• Format converter input settings (copy only)
• Format converter output settings (copy only)
For details, see "Copy and Swap" (page 177).

Video Process

The term "video process" is applied to adjustments to the
gain, hue, and black level of the input video signal. There
are two types of adjustment: adjustment for each input
signal and adjustment for each bus.
For details, see "Video Process" (page 184).

Color Corrector

The color corrector enables video signal color correction
(black balance/white balance adjustment, gamma
correction, knee correction, etc.).
The color corrector includes the following adjustments.
• Input video processing
• Primary color correction
• Secondary color correction
• Luminance processing
• Spot colors
• Output video processing
• YUV/RGB clips
For details, see "Color Corrector" (page 186).

Side Flags

The term "side flags" refers to the areas to the left and right
of an image with aspect ratio 4:3 embedded within a 16:9
21