Sony MVS-8000X User Manual page 238

2
Depending on the selection in step 1, set the following
parameters.
When [Angle] is selected
No. Parameter Adjustment
Rotation angle of pattern
1 Angle
a) –1.00 is one rotation in the counterclockwise direction. +1.00 is one
rotation in the clockwise direction. 0.00 is no rotation.
When [Speed] is selected
No. Parameter Adjustment
Rotation speed of pattern
1 Speed
a) –100.00 is four rotations per second in counterclockwise direction.
+100.00 is four rotations per second in clockwise direction. 0.00 is in
stationary state.
Applying modulation to the wipe crop
pattern (Modulation)
1
In the <Modulation> group of the Wipe Crop menu
(4116), select one of the following.
H: Modulate the pattern to apply waving in the
horizontal direction.
V: Modulate the pattern to apply waving in the vertical
direction.
2
Set the following parameters.
No. Parameter Adjustment
1 Amplitude Amplitude of modulation
2 Frequency Frequency of modulation
3 Speed Speed of ripples
Replicating the wipe crop pattern (Multi)
1
In the Wipe Crop menu (4116), press [Multi], turning
it on.
2
Set the following parameters.
No. Parameter Adjustment
1 H Multi Number of repetitions of pattern
horizontally
2 V Multi Number of repetitions of pattern
vertically
Invert Type Replication layout
3
a) See page 132.
Modifying the wipe crop pattern edge
(Edge)
You can apply a border to the wipe crop pattern, or soften
the boundary.
1
a)
In the <Edge> group of the Wipe Crop menu (4116),
select one of the following.
Border: Border
Soft: Soft edge
Soft Border: Soft border
2
Depending on the selection in step 1, set the following
a)
parameters.
When [Border] is selected
No.
1
When [Soft] is selected
No.
1
When [Soft Border] is selected
No.
1
2
3
Setting the signal or color to be inserted in
the wipe crop border
When a border or soft border is applied to a wipe crop, you
can set the signal or color to be inserted in the border.
1
In the <Border Fill> group of the Wipe Crop menu
(4116), select one of the following.
Flat Color: Single color
Mix Color: Mix color signal set in the DME >Edge
Ext Video: External video signal input to the Ext IN
2
When [Flat Color] is selected in step 1, set the
following parameters.
a)
No.
1
2
3
237
Parameter Adjustment
Width Border width
Parameter Adjustment
Soft Edge softness
Parameter Adjustment
Width Border width
Inner Soft Degree of softness inside the
border
Outer Soft Degree of softness outside the
border
>Color Mix menu (4117) (see page 238)
connector
Parameter Adjustment
Luminance Luminance
Saturation Saturation
Hue Hue