Operation Buttons - Sony MVS-8000X User Manual

Button name Description
• Selects the target DME channel
CH1 to CH8
in three-dimensional
transformation operation mode.
• Select the target DME channel
for operation in the DME menu.
• Displays the state of the
reference channel in the DME
menu.
CH1 to CH12 Selects the target device in VTR/
disk recorder/frame memory
operation mode.
FM1 CLIP to FM8 (Assignment in the Setup menu is
CLIP required.)
Selects the target frame memory
clip in VTR/disk recorder/frame
memory operation mode.
c Operation buttons
The function of the buttons vary depending on the
operation mode.
Resizer operation mode
This mode performs two-dimensional transformation
operations on images using a resizer.
Button name Description
RSZR ON (resizer on) Enables/disables the selected
resizer.
ASP PERS (ASP:
Adjusts the aspect ratio of a key to
aspect) which the resizer is applied using
the trackball or Z-ring.
Moves/zooms a key to which the
LOC SIZE (location
and size) resizer is applied using the trackball
or Z-ring.
ROT (ROT PERS: Adjusts the rotation and
rotation and perspective of a key to which the
perspective) resizer is applied using the trackball
or Z-ring.
SHIFT Used in combination with the [CTR]
and [CTR WORK BUFR] buttons.
• When the [CLR WORK BUFR]
[CLR WORK BUFR]
(clear work buffer)
button is pressed once:
Returns the resizer two-
dimensional transformation and
rotation parameters to the
defaults.
• When the [CLR WORK BUFR]
button is pressed twice, or is
pressed once while pressing the
[SHIFT] button:
Returns all resizer parameters to
the initial state.
FINE Switches to fine mode, enabling
fine adjustment control of setting
values using the trackball and Z-
ring.
Button name
CTR (center)
X, Y, Z
M/E DEF RCALL (M/E
default recall)
Three-dimensional transformation mode
This mode performs three-dimensional transformation
operations on images using a DME.
For details, see "Three-Dimensional Transform
Operations" (page 222).
Menu parameter operation mode
This mode is used to set menu parameters.
Button name
FINE
42
Description
• When the [CTR] is pressed once:
Adjusts the two-dimensional
transformation setting values to
the closest detent positions.
• When the [CTR] button is
pressed twice, or is pressed once
while pressing the [SHIFT]
button:
Returns the two-dimensional
transformation setting values to
the defaults.
• Restricts the parameters targeted
by the operation.
When the [X] button is lit:
Operations on parameters on the
X-axis using the trackball are
enabled.
When the [Y] button is lit:
Operations on parameters on the
X-axis using the trackball are
enabled.
When the [Z] button is lit:
Operations on parameters on the
Z-axis (Z-ring adjustment items)
using the Z-ring are enabled.
• When the [ROT] button is lit, the
[X] button and [Y] button select
the direction of rotation.
• Setting values for parameters of
buttons that are lit green can be
entered using the numeric
keypad control block.
Press the [M/E DEF RCALL] button
twice to return the currently
selected bank (M/E or PGM/PST)
to the defaults.
Description
Switches to fine mode, enabling
fine adjustment control of setting
values using the trackball and Z-
ring.