Graphics Display - Sony MVS-8000X User Manual

Change of aspect ratio
in X-axis direction
Simultaneous change aspect
ratio in X-axis direction and
Y-axis direction
Change image perspective (Perspective)
In target space, changes the perspective of the image by
changing the virtual viewpoint, without changing the
position of the image.
The X-axis and Y-axis values define the position of the
view point, and the Z-axis value defines its distance from
the image.
Change of viewpoint on
X-axis
Change of distance from
viewpoint to image
Change image slope (Skew)
In source space, changes the slope of the image on the X-
axis or Y-axis.
Change of aspect ratio
in Y-axis direction
Change of viewpoint on
Y-axis
214
Change of slope on X-axis

Graphics Display

Graphics display is a function that allows you to display
wire frames, coordinate axes, and a grid over the current
DME image, making it easier to create effects in three-
dimensional space.
Graphics displayed by this function can also be output to
the monitor output connector.
To make graphics display settings, use the DME menu (see
page 225).
You can display the following kinds of graphics.
Wire frame
A wire frame displays an image enclosed in a frame. This
allows you to check the position and size of the image. If
there is a shadow (see page 281), a frame is shown for the
shadow as well.
Coordinate axes
This is a three-dimensional display of coordinates in local
or global space.
This allows you to check the origin and the directions of
the X-, Y-, and Z-axes.
Channel ID
This displays the channel number so that you can check
which channel is being used. This is a useful feature when
you are working with multiple channels.
Channel IDs are displayed differently in local and global
space.
• In local space, the channel number is displayed along
with "F" or "B" to indicate whether you are looking at
the front (F) or back (B) of the current wire frame. For
example, "1F" means the front of the wire frame on
channel 1 in local space.
• In global space, the channel number is displayed along
with "G" to indicate global. For example, "G2" means
channel 2 in global space.
Change of slope on Y-axis