Output Video Process; Yuv Clips - Sony MVS-8000X User Manual

Note
This automatic adjustment does not carry out key gain
adjustment. Adjust the key gain as shown in step 6, as
required.
6
Select [Key Adjust] and adjust the key.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
4 Gain Key gain
7
Select [Window] and adjust the key detection range
for spot color adjustment.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
8
In the <Spot CCR> group, select [Spot CCR] and
adjust the replacement color.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
To return the parameters to their default settings
In the <Spot CCR> group, press [Unity].
Masking a part of the spot color
adjustment
In the CCR >CCR1 >Spot CCR/Output menu (2416),
press [Mask], turning it on. The operation is identical to
primary color correction. See "Masking a part of the
primary color correction" (page 189).
Adjusting the color outside the spot color
adjustment region
1
In the <Outer Out Proc> group of the CCR >CCR1
>Spot CCR/Output menu (2416), press [Outer Out
Proc], turning it on.
2
Set the following parameters.
No. Parameter Adjustment
1 Video Gain Video signal gain
2 Y Gain Luminance signal gain
3 C Gain Chrominance signal gain
No. Parameter
4 Hue Delay
5 Black Level
To return the parameters to their default settings
In the <Outer Out Proc> group, press [Unity].

Output Video Process

The following corrections are available for the YUV
signal.
• Video signal overall gain adjustment
• Luminance signal gain adjustment
• Luminance signal offset adjustment
• Chrominance signal gain adjustment
• Chrominance signal hue adjustment
Applying output video process effects
1
Open the CCR >CCR1 >Spot CCR/Output menu
(2416).
2
In the <Output Process> group, press [Output
Process], turning it on.
3
Set the following parameters.
No. Parameter
1 Video Gain
2 Y Gain
3 C Gain
4 Hue Delay
5 Black Level
To return the parameters to their default settings
In the <Output Process> group, press [Unity].

YUV Clips

For each of the luminance and color difference signals, the
following processing is available.
• White clip: Sets the maximum level of the luminance
signal.
• Dark clip: Sets the minimum level of the luminance
signal.
• Positive clip: Sets the maximum amplitude in the
positive direction of the color difference signal.
• Negative clip: Sets the maximum amplitude in the
negative direction of the color difference signal.
192
Adjustment
Hue delay
Black level
Adjustment
Video signal gain
Luminance signal gain
Chrominance signal gain
Hue delay
Black level