Multi Program 2 Mode Restrictions - Sony MVS-8000X User Manual

• The sub bank background A bus (utility 2 bus) is shared
with wipe edge border fill. Making a change to one
affects the other.
• Even if the wipe border width is set to the same numeric
value for main and sub, the same image is not obtained.

Multi Program 2 Mode Restrictions

• The following functions are not available on the sub
bank.
- Data copy and swap
- Default recall (except for parametric recall)
- [AUTO PVW] button (button assigned with the "Auto
Preview" utility command)
• Re-entry is limited to four levels. Re-entry is not
possible between main and sub on the same M/E.
However, this restriction can be removed.
For details, see "Enabling re-entry between main and
sub" (page 201).
• In the following cases, a transition using the fader lever
may not be performed correctly:
- When the main and sub bus toggle modes are set
differently
- For a pattern mix, preset color mix, and so on
• For an Internal bus link, GPI link, or External bus link,
the "Utility 2" bus cannot be selected.
• Screen aspect, show key, and [MACRO ATTACH
ENABLE] button settings are common to main and sub.
• If a snapshot is recalled simultaneously for main and sub
or a keyframe is executed simultaneously for main and
sub, then the settings on the main bank are reflected in
the following shared data on main and sub.
- Keys
- M/E Config
- DME external video bus and utility 1 bus
• When a macro attachment is set on the DME utility 1 bus
or DME utility 2 bus, it is not possible to make separate
main and sub settings.
• When snapshots with different M/E Config settings are
recalled:
- If M/E Config data is not to be included in the snapshot
data, the current system settings are used for snapshot
reproduction.
- If M/E Config data is to be included in the snapshot
data, first M/E Config data is set and then other
snapshot data is recalled.
• The bus override function is only available on the
following buses:
- M/E-1 to M/E-5 Main BKGD A/B buses
- M/E-1 to M/E-5 Sub BKGD A/B buses (Util 2, Util 3
bus)
- P/P Main PGM/PST bus
- P/P Sub PGM/PST bus (Util 2, Util 3 bus)
• When a master snapshot or master timeline is executed
with a key assigned to both main and sub, it is uncertain
which data will be reflected.
• When recalling a master snapshot with different register
numbers for main and sub, the recall timing may differ
by one field or more between main and sub.
• The link state is maintained even when M/E Config is
changed. Set the link setting again, as required.
• Since key 2 to key 8 are shared between main and sub, if
the main and sub fader lever positions are different and
you move the fader lever, the video changes
instantaneously to the value of the most recently moved
fader lever.
• When the transition type for main or sub is set to preset
color mix, it is not possible to carry out independent key
transition operation (common to main and sub).
• Snapshots, wipe snapshots, and effects created using a
wipe on the sub bank when the signal format is 1080P do
not function correctly with signal formats other than
1080P. Similarly, those created when the signal format is
other than 1080P do not function correctly when the
signal format is 1080P.
203