Setting A Removable Drive As The Primary Device; Initializing The Local Drive; Locking Setup Menu Settings - Sony MVS-8000X User Manual

2
In the Engineering Setup >System >Maintenance
menu (7317), select the removable drive.
3
In the <USB Storage Device> group, press [Format].
4
Check the message, then press [Yes].
Setting a Removable Drive as the
Primary Device
This sets the removable drive as the primary device.
Note
When a removable drive is not specified as the primary
device, [Removable Drive] cannot be specified for
operation in the File menu. Always configure this item.
1
In the Engineering Setup >System >Maintenance
menu (7317), select the removable drive.
2
In the <USB Storage Device> group, press [Set
Primary].
To set as the primary device automatically
In the <USB Storage Device> group, press [Auto Detect].

Initializing the Local Drive

If the local drive becomes corrupted, format the drive.
1
In the <Local Drive> group of the Engineering Setup
>System >Maintenance menu (7317), press [Format].
Note
When the local drive is operating normally, [Format]
cannot be pressed.
2
Check the message, then press [Yes].
3
Check the message, then press [OK].

Locking Setup Menu Settings

To protect the data, you can inhibit operations in selected
Setup menus. Note that it is not possible to lock the Setup
Operation Lock menu.
1
In the Engineering Setup >System >Maintenance
menu (7317), press [Setup Operation Lock].
The Setup Operation Lock menu (7317.1) appears.
2
In the <VF Group> group, select the group containing
the target menu to set.
3
Select the menu candidates for locking.
To select all menus within a group, press [ALL].
You can also select a menu while it is open.
For details, see "Selecting an opened setup menu for
locking" (page 406).
4
Press [Lock Item Select].
The selected menus become candidates for locking,
and a padlock icon (unlocked) appears in the
"Lock" field.
Note
If there are already one or more locked menus,
selection of lock candidates is not possible.
To deselect a lock candidate
Selecting a menu and press [Lock Item Select] again,
making the "Lock" field blank.
To deselect all lock candidates by group
Press [Lock Item All Clear].
5
Repeat steps 2 to 4 to select all lock candidates.
6
Press [Lock].
7
Enter a password of up to 16 characters in the
keyboard window, and press [Enter].
The menus in the list of candidates are all locked. The
padlock icon changes to the locked state
To release the lock
When the padlock icon is locked, press [Lock] and enter
the password.
Changing the lock password
1
In the Engineering Setup >System >Maintenance
>Setup Operation Lock menu (7317.1), press [Change
Password].
2
Check the message, then press [Yes].
3
Follow the on-screen instructions to enter the old
password and new password.
Selecting an opened setup menu for
locking
With the menu you want to lock in the open state, press
[Lock Item Select] at the lower left.
406
.