Sony MVS-8000X User Manual page 170

Background transition display area
Clip display area
3
Press [Clip].
The Clip menu (1176.1) appears.
The status area displays a list of clips.
4
Select the clip to use in the clip transition.
5
Return to the Clip Transition menu (1176), and select
the background transition type in the <BKGD
Transition Type> group.
Note
To make detailed settings for the selected background
transition, make adjustments in the M/E-1 >Misc
>Transition menu (1171).
6
In the <Select> group, press [BKGD Transition].
7
Use either of the following methods to set the
background transition start point independently of the
clip playback timing.
• Move the fader lever to the desired position, and
press [Start] in the <BKGD Transition Set Timing>
group.
• Set the number of frames using the [BKGD Trans
Start] parameter (left edge of the reference axis is
frame 0).
Clip transition display area
169
Position of frame 0
8
Using either of the following methods, set the end
point of the background transition.
• Move the fader lever to the desired position, and
press [Stop] in the <BKGD Transition Set Timing>
group.
• Set the number of frames using the [BKGD Trans
Stop] parameter.
9
If [Wipe] or [DME Wipe] is selected in the <BKGD
Transition Type> group, select the background
transition direction in the <BKGD Transition
Direction> group.
10
In the <Select> group, press [FM1&2 Clip].
11
Using either of the following methods, set the start
point of the clip.
• Move the fader lever to the desired start point, and
press [Start] in the <Clip Transition Set Timing>
group.
• Set the number of frames using the [Clip Start]
parameter (left edge of the reference axis is frame 0).
Note
It is not possible to set the clip end point.
12
In the <Clip Transition Direction> group, select the
playback direction of the clip.
To reset the start point and end point
Press [Timing Reset].
The background transition start point and end point, and
the clip start point are all reset.
Reference axis