Key Border Settings; Art Edge Settings - Sony MVS-8000X User Manual

Key Border Settings

Note
The Key Border function is not supported on the MVE-
8000A.
Applying key borders
1
Open the DME >Edge >Key Border menu (4113).
2
Press [Key Border], turning it on.
Note
The key border function and glow function (see
page 244) cannot be enabled at the same time. The
most recently set function is enabled.
3
Set the following parameters.
No. Parameter Adjustment
1 H Simultaneously adjust width of left
and right key borders
2 V
Simultaneously adjust width of top
and bottom key borders
3 All
Simultaneously adjust width of all
four key borders
4 Soft Softness of the key borders
5 Density Density of the key borders
4
To set the key border color, press [Flat Color] and set
the following parameters.
No. Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
To select an outline-only key
Press [Outline], turning it on.

Art Edge Settings

Note
The Art Edge function is not supported on the MVE-
8000A.
Applying art edges
1
Open the DME >Edge >Art Edge menu (4114).
2
Press [Art Edge], turning it on.
Note
The Defocus, Blur, Key Border, and Glow effects
cannot be applied to the Art Edge sections.
3
Set the following parameters.
Parameter group [1/2]
No. Parameter Adjustment
1 H
2 V
3 All
5 Density
Parameter group [2/2]
No. Parameter Adjustment
1 Top
2 Left
3 Right
4 Bottom
5 Density
Adjusting the position of art edges
1
In the Art Edge menu (4114), press [Edge Position].
2
Set the following parameters.
No. Parameter Adjustment
1 Top
2 Left
3 Right
4 Bottom
5 All
230
Simultaneously adjust width of left
and right edges
Simultaneously adjust width of top
and bottom edges
Simultaneously adjust width of all
four edges
Density of edges
Width of top edge
Width of left edge
Width of right edge
Width of bottom edge
Density of edges
Position of top edge
Position of left edge
Position of right edge
Position of bottom edge
Adjust the position of all four edges